An issue that causes the Blue Screen of Death is called Driver Power State Failure. Typically, this issue is caused by broken or corrupted drivers, or by incorrect power settings in your computer.
Problem messages appear on the screen when a Driver Power State Failure error occurs. Here are a few things you can do to fix DRIVER POWER STATE FAILURE:
Method 1: Check the System Power Saving Settings in System Configuration
Problems with power settings might cause Driver Power State Failures. As a result, resetting the power settings should fix the problem.
Step-by-step instructions are given below.
Step 1: Open up the Run box by pressing Windows and R on the keyboard at once.
Step 2: To access the Control Panel, type “Control Panel” into the Run box and press the OK button.
Step 3: Power Options will show in the All Control Panel Items window.
Step 4: Change plan settings are mentioned to the right of this option.
Step 5: Change the advanced power settings
Step 6: When you click on the Advanced Settings link, a new window will open with further configuration options.
Step 7: Expand Wireless Adapter Settings, then Power Saving Mode, then select the Maximum Performance option from the drop-down menu.
Step 8: Now, extend PCI Express and then Link Power Management in the next two steps. Now select the drop-down option for maximum power savings.
Step 9: Next, click on the Apply button and then Ok button to save the changes you’ve made to the system.
If the error is gone, restart the computer and see if the problem persists.
Method 2: Remove the offending drivers from your computer
faulty or corrupted drivers may be responsible for a power failure in the driver’s power state. Open the Device Manager to see if your drivers are up to date. You should uninstall any device if it has a yellow mark next to it since that indicates that the device is either missing or corrupted.
Uninstall the driver by following the steps outlined below:
Step 1: Press Windows and R together on the keyboard to launch the Run box.
Step 2: To continue, type devmgmt.msc and click OK.
Step 3: The Device Manager window will open, displaying all of the connected devices. Search for the yellow-marked device by expanding the category.
Step 4: Right-click on the yellow-marked device and then select Uninstall from the context menu.
Step 5: Re-run the procedure to remove all drivers marked with a yellow exclamation point.
Step 6: Next, restart your computer to see whether the Driver Power State Failure problem has been repaired.
Method 3: Run a System File Check (SFC) scan
System files are scanned using the SFC/Scannow command. To execute an SFC scan, you must open the command prompt on your computer and type the command SFC scan.
To fix the problem, follow the following steps:
Step 1: Press the Windows and X keys on the keyboard to begin the process. You’ll see a list appear.
Step 2: From the drop-down menu, select Command Prompt (Admin).
Step 3: Next, you’ll see a command prompt appear on your screen. Press Enter to launch the sfc/scannow command.
Step 4: Scanning will begin, and you’ll have to wait for it to finish.
Step 5: You can also use DISM scan for scanning
The DISM scan can be performed as follows:
Step 1: Run the following commands on your computer:
Step 2: Scanhealth.exe /Online/Cleanup-image
Step 3: Cleanup-image /Restore health /exe /online /
Step 4: Observe the results of the scan to see if the problem has been resolved.
Method 4: Antivirus software can be disabled or removed from the system
Avast and McAfee’s complete protection are excellent antivirus programs. However, they can also generate Driver Power State Failure errors on occasion. Antivirus software must be disabled or uninstalled in order to fix the problem
Only a specialized tool can be used to remove antivirus software from your computer. Uninstalling an antivirus program is as simple as locating the associated tool and running it.
Do another test to see whether the problem persists. Antivirus software can be updated or switched to a different anti-virus program in case the error has been fixed and downloaded the newest version.
Method 5: Install an older version of your graphics card’s driver
Reverting back to a previous version of the Graphics Card Driver can help prevent Driver Power State Failure.
Here are the actions you need to take to accomplish this:
Step 1: Press Windows and R together on the keyboard to launch the Run box.
Step 2: To access the Control Panel, type “Control Panel” into the Run box and press the OK button.
Step 3: Select Device Manager from the drop-down menu that appears.
Step 4: Expand the choice Right-click on the graphics card in the list of display adapters to bring up the context menu.
Step 5: Select the Properties option as next step. The Driver tab will open in a new window.
Step 6: Wait for the process to finish by clicking on Rollback Driver.
It is necessary to uninstall your graphics card if the Rollback Driver button is not visible. Afterward, download the older version from the manufacturer’s website and uninstall the newer version.
Method 6: Changing Nvidia Contrl Panel Settings
Nvidia Control Panel Power Settings can be changed in this method.
Power Settings are a major factor in the failure of the Driver Power State. If you’re having this issue with Nvidia graphics, try the methods listed below to fix it:
Step 1: Opening Nvidia Control Panel is the first step.
Step 2: From the left-hand pane, select Manage 3D settings.
Step 3: From the right side of the pane, select your dedicated graphics card as a Preferred graphics processor. Power Management mode can be set to Prefer Maximum Performance in the settings.
Save your changes and re-evaluate the problem.
Also Read:
2. Minecraft
Method 8: Adjust Your System’s Power Plan Settings
To alter your system’s Power Plan Settings, follow the steps outlined below:
Step 1: To open the Run box, press the Windows and R keys together.
Step 2: After launching the Run box, type Control Panel, and then press the OK button to bring up the Control Panel’s window.
Step 3: Choose from the available Power options in the next step.
Step 4: In order to make changes to your plan, go to Step 4 and click on Change plan settings.
Step 5: Change the advanced power settings
Step 6: Open up the Sleep and Hibernate options, and adjust their values to Never. Set the value of the Do Nothing option in the Power button and the Lid.
Finally click the Apply and OK buttons to finalize the adjustments you’ve made.
